Engineer ii embedded hardware firmware design engineer

Should be good at designing Basic Electronic CircuitsShould be experienced at designing Embedded System Circuits using MicrocontrollersShould be experienced with various communication protocols such as UART, SPI, I2C, CAN, USB, Ethernet, etc.Should be sound with basics, fundamentals and essentials of Electronics and Power ElectronicsShould have an hands-on experience with at least one schematic design software eg. AltiumShould have an hands-on experience with at least one PCB design software eg. Altium, Allegro, Eagle, etc.Should be able to conduct fault findings on various kinds of digital and analog circuitsShould be able to read, understand and modify existing circuit and schematic diagramsShould be good at documentation relating to circuit designs and calculations, test procedures and results, verification / validation procedures and resultsShould be strong in C and Embedded C programmingShould have worked on 32 bit Microcontrollers eg. STM32Should have an hands on with GPIO programming, ADCs, Timers, Counters, UART, SPI, I2C, Ethernet, USB, etc.Should have an experience with firmware on CAN protocolsShould have preferably worked on Linux or similar platformShould be proficient at the testing and debugging of self-written as well as existing firmware codes Powered by Webbtree